Share on facebook
Share on twitter
Share on linkedin

WHAT IS POLY PIPE AND PIPE FITTINGS

HDPE Pipe And Fittings Are High-Density Polyethylene Produced With Extrusion & Integral Forming Production Processes, Which Are Widely Used In Drinking Water, Sewage Transmission, Dredge, Landscaping Pipe, Irrigation,  Compressed Gas System, Storage, And Channel In The Field Of Water Supply, Chemical, Mining, Petroleum Industry Etc.

HDPE PIPE 

PLASTIC POLY PIPE AND FITTINGS FEATURES:

  • Good Sanitation Performance: Poly Pipe And HDPE Pipe Fittings Are Manufactured Without Adding Heavy Metal Salt Stabilizer. The Products Are Non-Toxic, Non-Scaling Layer, Non-Breeding Bacteria, A Good Solution To The City Drinking Water Secondary Pollution.
  • Excellent Corrosion Resistance: Polyethylene Is A Very Popular Material For Pipes And Pipe Fittings. It Is Resistant To Chemicals. (Very Good Resistance To Chemicals: Acetic Acid, Ammonium Hydroxide 30%, Calcium Hydroxide 30%, Diethylene Glycol, Ethylene Glycol, Ethanol, Glycerin, Glycol Etc. Good Resistance To Chemicals: Acetone, Formaldehyde 10-40%, Gas Oil, Caproic Acid, Iodine, Isobutanol, Mineral Oil, Motor Oil, Natural Gas, Gasoline, Etc.) 
  • Long Service Life: With The Service Environment Of Rated Temperature And Pressure, PE Pipe And Fittings Can Be Used Safely For More Than 50 Years.
  • Better Impact Resistance: Polyethylene Pipe And Fittings Are Tough With High Impact Strength. Weight Directly Pressed Through The Pipe And Fittings, Will Not Lead To Pipe Rupture.
  • Reliable Joint Performance: The Strength Of The Hot-Melt Or Electric-Melt Joint Of PE Pipe Is Higher Than That Of The Pipe Body, And The Joint Can Not Be Broken Due To Soil Movement Or Live Load.
  •  Good Construction Performance: The Pe Pipe And HDPE Fittings Are Light, Flexible, And Easy Fusion Connection, Which Make The HDPE Pipe And Fittings Are Very Easy To Construct And With Low Cost.

PE PIPE FUSION 

CONNECTION OF POLYETHYLENE PIPES AND FITTINGS:

  • Electrofusion: Is A Simple Method Using The Special Electrofusion Machine To Join The HDPE Pipe And Fittings Together Where Butt Fusion Is Not Practicable (Especially Where Elbows, Tees And Valve Must Be Added). It Especially Is Applied For PE Pipe With A Diameter Of Less Than 160 Mm.
  • Hot-Melt Butt Fusion: Is A Thermofusion Process Using Special Butt-Fusion Machine Heating The Ends Of Two Pipe/Fittings To Be Joined, Until A Melting State Is Attained On The Pipe And Fitting Contact Surface, It Is Especially Applied For Pipes With A Diameter Of More Than 160 Mm.
  • Steel-Plastic Connection: Flange, Barbed Fittings, And Other Methods Can Be Used To Join.
Share on facebook
Share on twitter
Share on linkedin

Leave a Comment

Your email address will not be published. Required fields are marked *